Register Login
Favorites
...
Refrigeration and Building Management Systems
/
Pack Controllers
/
VS 3010 x Family
/
VS 3010
/
FAQ Pack Controller VS ..
/
One of the following symptoms: - The pack controller 'forgets' setpoints in the case of power failure / restart. - The setpoint telegram is discarded for a setpoint adjustment using LDSWin. - All run times are very short.

One of the following symptoms: - The pack controller 'forgets' setpoints in the case of power failure / restart. - The setpoint telegram is discarded for a setpoint adjustment using LDSWin. - All run times are very short.

The Commissioning Engineer Mode is activated on the controller (DIP switch 5 is ON). Setpoint changes in this mode are not saved. All run times are set to the lowest values and the switching frequency limitation is deactivated.
Remedy: For normal operation of the system, DIP switch 5 MUST always be OFF! 

One of the following symptoms: - The pack controller 'forgets' setpoints in the case of power failure / restart. - The setpoint telegram is discarded for a setpoint adjustment using LDSWin. - All run times are very short.

The Commissioning Engineer Mode is activated on the controller (DIP switch 5 is ON). Setpoint changes in this mode are not saved. All run times are set to the lowest values and the switching frequency limitation is deactivated.
Remedy: For normal operation of the system, DIP switch 5 MUST always be OFF! 

One of the following symptoms: - The pack controller 'forgets' setpoints in the case of power failure / restart. - The setpoint telegram is discarded for a setpoint adjustment using LDSWin. - All run times are very short.

The Commissioning Engineer Mode is activated on the controller (DIP switch 5 is ON). Setpoint changes in this mode are not saved. All run times are set to the lowest values and the switching frequency limitation is deactivated.
Remedy: For normal operation of the system, DIP switch 5 MUST always be OFF! 
Imprint Contact v10.01
Erklärung:

Jeder User des EDP hat einen zusätzlichen Cloud-Speicher. Innerhalb der OwnCloud können Pfade erstellt werden, die hierüber mit einer EDP-Komponente verknüpft werden.

Auf diese Weise sind z.B. Massen-Uploads ins EDP möglich, d.h. es können beliebig viele Dokumente in den Pfad der OwnCloud kopiert werden, die dann automatisch in die zugeordnete Komponente im EDP synchronisiert werden.